Simple Type Exterior/Interior Wall/ Glass/Metal/Wood Water Based Acrylic Emulsion Latex Paints Dispersing Dissolver Making Machine

Basic Info

Layout Type	Verticle
Mixing Drum Shape	Seal Head+Cylinder Shell
Additional Capabilities	Milling
Operating type	Continuous Operating
Condition	New
Production Formula	Available
Engineer Service	Overseas Service Available
Production Factory Visiting	Available
Application 01	Making Water Based Wall Paints
Application 02	Making Water Based Wood Paints
Application 03	Making Water Based Glass Paints
Application 04	Making Water Based Metal Paints
Application 05	Making Fire-Proof Paints/Coatings
Application 06	Making Waterproof Paints/Coating
Application 07	Liquid Waterproof Coiled Materials
Application 08	Water Proof Tile Glue
Specification	1000T water solvent paints
Origin	China
HS Code	8479820090
Production Capacity	90 Sets Per Year

Product Description

Simple type water based acrylic emulsion/ latex paints making machine for exterior/interior wall/ glass/metal/wood paints/fireproof/waterproof paints/coatings,etc

It includes:
1.High speed dissolver/disperser:
2.Stainless steel tank:
3.Vertical sand mill or horizontal sand mill
4.Vibration sieve(needing Hand manual forklift) or bag filter (it can be equipped with filling head or capping machine)

How to make water based acrylic emulsion/ latex paints/coatings?

The production process of water-based acrylic emulsion/latex paints/coatings is the process of putting various components of raw materials in a certain order and dispersing them evenly.

The general production process of water based acrylic emulsion/latex paints/coatings includes 3 steps:

1. Preparation of slurry:
Put water, dispersant, defoamer, antiseptic and other liquid materials into the stainless steel dispersion tank and stir evenly. Put the coloring pigments and extender pigments in sequence under stirring, and accelerate the dispersion for 20-40 minutes.

2. Preparation of water-based paint:
Put the emulsion in the paint mixing tank, then add the thickener, PH adjuster, antifreeze, film-forming auxiliary, defoamer and other auxiliary agents, and stir for about 15 minutes until it is completely uniform. Check out the material.

3. Paint filtration and product packaging:
In the production process of latex paint, because a small part of the pigments and fillers are not dispersed, or because they are broken into particles, or impurities are left in the paint, the paint at this time needs to be filtered to remove coarse Particles and impurities can only produce good quality products. According to different product requirements, different specifications of screens and different container packaging can be selected and measured, so that the final product can be obtained.

====================================================================================================================================

Notes:If you want to save labour and improve working environment(for example,powder dust,etc),you can choose the Integrated production line!!!

What is the integrated water based paints/coatings production line???

This water based acrylic paints production line includes: liquid feeding tank, powder feeding tank, vertical sand mill (or horizontal sand mill),stainless steel tank, dispersion tank, paint mixing tank, bag filter, filling machine, air compressor , Vacuum pumps, capping machines, etc.

Features of this production line:

1. According to the different types of coatings and paints and the different requirements for fineness, you can choose a vertical sand mill or a horizontal sand mill.In principle, vertical sand mills are suitable for exterior wall coatings or metallic paints for steel structures, and horizontal sand mills are suitable for interior wall coatings.(Please refer to the followed two photos.)

2. The raw materials contacting part is stainless steel 304, which can fully meet the production needs of water-based or oil-based paint.3. Vacuum feeding, fast speed and less dust.4. The equipment has a powder feeding system, a liquid feeding system, and an additive feeding port. 5.Frequency converter speed control,microcomputer control system,automatic filling measurement and capping device.6.The biggest advantage:it can be widely used to make lots of different kinds of paints or coatings or other construction materials.It can be used to produce a variety of paint and paint products to fully meet the market needs of customers.

1)Water based acrylic emulsion/latex paints (1 to 3 years, 3 to 5 years, 5 to 8 years, 8 years or more of various grades of internal and external wall latex paints, primers, etc.). There are matt latex paint, bright latex paint, elastic latex Paint etc.)2)Paste type (it can produce high-gloss imitation porcelain paint, crystal tempered paint, interior wall putty paste, exterior wall putty paste, elastic putty paste, etc.)3)Glues (can produce master glue, interior wall glue, exterior wall glue, gypsum powder glue, talcum powder glue, polymer glue, special glue for black and white cement, etc.)

In addition, the line can produce the following products by adding auxiliary equipment:

1)Putty powder (can produce interior wall putty powder, exterior wall putty powder, elastic putty powder, flexible putty powder, etc.)2)Mortar (can produce thermal insulation mortar, bonding mortar, plastering mortar, etc.)3)Real stone paint (can produce various grades of real stone paint, rock chip paint, primer, top paint, etc.)

 

Regarding the construction industry, what product formulations and equipment can you provide?

1) Water-based paints: water-based interior and exterior wall paint, wood paint, metal paint, glass paint.
For example: latex paint (1-3 years, 3-5 years, 5-8 years, 8 years or more, various grades of interior and exterior wall latex paints, primers, etc. matt latex paint, bright latex paint, elastic Latex paint, etc.)

2) Solvent paints: Metal anti-rust paint, road marking paint.

3) Paste type (high-gloss imitation porcelain paint, crystal tempered paint, interior wall putty paste, exterior wall putty paste, elastic putty paste, etc.)

4) Glue (master glue, internal wall glue, external wall glue, gypsum powder glue, talc glue, polymer glue, special glue for black and white cement, etc.)
Such as: PVA polyvinyl alcohol glue, 107, 108, 801, 901.

5) Putty powder (interior wall putty powder, exterior wall putty powder, elastic putty powder, flexible putty powder, etc.).

6) Mortar (insulation mortar, bonding mortar, plastering mortar, etc.)
Others: Front elevation (color and without color), Wall plaster, Industrial column (Pole), Tile bond, Tile grout, Anti-cracker, Bricks masonry mortar ,Damp proof course (DPC) mortar,Sealant mortar, thermal insulation mortar,etc.

7) Real stone texture paint (various grades of real stone paint, rock chip paint, primer, top paint, etc.), water-in-water, imitation marble paint, imitation granite paint, sand-in-water, colorful paint.

8) Tile beauty grout.

9) Acrylic sealant, waterproof glue, glass glue.

10) Silicone sealant.

11) Polycarboxylic acid water reducer.

12) Small concrete mixing tank truck.